HP Proliant Server DL580 G8

اچ پی پرولینت سرور دی ال ۵۸۰ جی ۸

شروع قیمت: ۶۹۳,۵۰۰,۰۰۰ ریال

قیمت فروش ویژه: ۶۹۰,۰۰۰,۰۰۰ ریال

سرور DL580 G8 با قابلیت پشتیبانی از نسل دوم پروسسورهای Intel® Xeon® E7-4800/8800، تعداد ۹۶ بانک حافظه، ۴ پاور، سروری مناسب جهت انجام پروژه های مجازی سازی و پردازش های سنگین می باشد. از دیگر ویژگی های این دستگاه قابلیت پشتیبانی از انواع Raid و هاردهای پر سرعت SAS می باشد.

تکنولوژی های مورد استفاده و سازگار

وضعیت موجودی :
گارانتی :گارانتی ۱ ساله شرکت ماندگار (تعویض) | همراه با نصب سیستم عامل رایگان
مشخصات فنی :
Processor family :

Fifteen-Core Processors
Intel® Xeon® E7-4890v2 (2.8GHz/15-core/37.5MB/155W) Processor
Intel® Xeon® E7-4880v2 (2.5GHz/15-core/37.5MB/130W) Processor
Intel® Xeon® E7-4870v2 (2.3GHz/15-core/30MB/130W) Processor
Intel® Xeon® E7-8880Lv2 (2.2GHz/15-core/37.5MB/105W) Processor
NOTE: This is a power optimized processor
Twelve-Core Processors
Intel® Xeon® E7-4860v2 (2.6GHz/12-core/30MB/130W) Processor
Intel® Xeon® E7-4850v2 (2.3GHz/12-core/24MB/105W) Processor
Intel® Xeon® E7-8857v2 (3.0GHz/12-core/30MB/130W) Processor
NOTE: This is frequency optimized processor suited high performance computing applications
Ten-Core Processors
Intel® Xeon® E7-4830v2 (2.2GHz/10-core/20MB/105W) Processor
Intel® Xeon® E7-8891v2 (3.2GHz/10-core/37.5MB/155W) Processor
NOTE: This is a lower core, higher frequency processor for software licensing cost optimization
Eight-Core Processors
Intel® Xeon® E7-4820v2 (2.0GHz/8-core/16MB/105W) Processor
Six-Core Processors
Intel® Xeon® E7-4809v2 (1.9GHz/6-core/12MB/105W) Processor
Intel® Xeon® E7-8893v2 (3.4GHz/6-core/37.5MB/155W) Processor
NOTE: This is a lower core, higher frequency processor for software licensing cost optimization

Cache Memory :

۳۷٫۵MB (1 x 37.5MB) Level 3 cache (E7-4890 v2, E7-8880Lv2, E7-4880v2, E7-8891v2, E7-8893v2)
۳۰MB (1 x 30MB) Level 3 cache (E7-8857v2, E7-4870v2, E7-4860v2)
۲۴MB (1 x 24MB) Level 3 cache (E7-4850v2)
۲۰MB (1 x 20MB) Level 3 cache (E7-4830v2)
۱۶MB (1 x 16MB) Level 3 cache (E7-4820v2)
۱۲MB (1 x 12MB) Level 3 cache (E7-4809v2)

Chipset :

Intel® C602J Chipset
Intel® Xeon® E7-4800/8800 v2 Processor Family
NOTE: For more information regarding Intel chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/

Upgradeability :

Up to:
Four (4) processors
Ninety-six (96) DDR3 DIMM slots
Nine (9) PCIe Gen3 expansion slots
NOTE: PCIe slot availability is dependent on the number of processors installed. Please refer to the “Expansion slots” section for more details.
Ten (10) SFF internal HDD/SSD drive bays
NOTE: Five drive bays come standard. An optional backplane kit with five drive bays can be ordered for ten drives.
Four (4) redundant hot-plug power supplies

On System Management Chipset :

HP iLO (Firmware: HP iLO 4)
NOTE: For more information, visit: http://www.hp.com/go/ilo

Memory Protection :

Advanced ECC
NOTE: Advanced ECC uses single device data correction (SDDC) to detect and correct single and all multi-bit error that occurs within a single DRAM chip. Both x4 and x8 SDDC are supported (x8 requires lockstep mode).
Online Spare
NOTE: Memory online spare mode (also known as rank spare mode) detects a rank that is degrading and switches operation to the spare rank.
Lock-step mode
NOTE: Memory Lockstep mode is used to correct a single x8 DRAM device failure on a DIMM. The DIMMs in each paired memory channel must have identical HP part numbers.

Memory :

Type
HP SmartMemory
DDR3 Registered (RDIMM) and Load Reduced (LRDIMM)
DIMM Slots Available

۹۶ DIMM slots
Maximum
۶TB (96 x 64GB)
NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen8. For additional information, please see the HP SmartMemory QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a server. NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz, or 1066MHz. Please see Memory Population Table below or the Online Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.

System Fault Management and Diagnostics :

HP ProLiant DL580 Gen8 offers advanced error recovery, component quarantine, fault tolerance and event reporting features to enable class-leading availability and rock-solid reliability that businesses can depend on. The DL580 Gen8 server firmware features advanced machine check architecture and memory fault tolerance capabilities that customers need for running their mission-critical applications. These advanced fault management features combine with quality components (HP Qualified Options) and extensive qualification to provide a high degree of system availability.
HP Advanced Error Recovery
Introduced with the HP ProLiant DL580 Gen8, HP Advanced Error Recovery enables applications to recover from uncorrectable errors found in processor, cache and memory during execution. The system firmware works with the operating system and/or hypervisor and/or end-application to enable the optimal recovery response so that the impact of the error can be avoided or minimized. Where such an error would have crashed the system in the past, with HP Advanced Error Recovery, the system can continue to function with limiting the impact of the error to a killed/re-started thread, process and/or virtual machine.
NOTE:

Supported on Intel® E7-4800/8800 v2 based systems only

On select Operating Systems, Hypervisors and end-applications that support Intel Machine Check Architecture Recovery feature.
Windows Server 2012 R2 and Hyper-V 2012 R2
Windows Server 2012 (requires Microsoft hotfix 2901012) and Hyper-V 2012
Redhat Enterprise Linux 6.4 and later

SLES 11 SP3 and later

HP Memory Quarantine
HP Memory Quarantine Identifies memory regions containing uncorrectable hardware errors by using a patrol scrubber and isolates the bad memory location before it affects other data. If an error is found, the hardware attempts to correct it. If the hardware cannot correct the error, the platform firmware notifies the operating system. Depending on the state of the memory pages associated with the identified memory region, the OS or hypervisor may take those pages out of the available pool. If the memory pages are already committed to a virtual machine (VM), the OS or hypervisor may choose to shut down the associated VM (Guest OS) or cause a Machine Check Exception to the Guest OS. The associated VM (Guest OS) might in turn close down the affected thread or process or it might shut down on its own. You can restart the halted VM or process once you replace the bad memory at the server’s next maintenance cycle.

NOTE:

Supported on Intel® E7-4800/8800 and E7 v2 based systems only

On select Operating Systems, Hypervisors and end-applications that support Machine Check Architecture Recovery functionality.
Windows Server 2012 R2 and Hyper-V 2012 R2
Windows Server 2012 (requires Microsoft hotfix 2901012) and Hyper-V 2012
Windows Server 2008 R2 and Hyper-V 2008 R2
Windows Server 2008 and Hyper-V 2008
Redhat Enterprise Linux 6.4
SLES 11 SP3

HP Advanced Error Containment
The DL580 Gen8 features advanced PCIe error containment capability that prevents corrupted data propagation. If data corruption is found on the PCIe bus, the system re-sets the PCIe root port and re-starts the transaction. This feature helps protect customer data and prevents the error from creating a chain of failures across the datacenter.

NOTE:

Supported on Intel® E7-4800/8800 and E7 v2 based systems only

HP Advanced Fault Resiliency
Double Data Device Correction (DDDC) – Detects and corrects up to two DRAM chip failures for every x4 DIMM in the server. DDDC requires memory lockstep mode and may impact performance to varying degrees depending on workload memory access characteristics.
NOTE: Supported on Intel® E7-4800/8800 based systems only.
Single Data Device Correction (SDDC) – Detects and corrects one DRAM chip failures for every x4 DIMM in the server. Further corrects single-bit errors after one DRAM chip failure. SDDC is supported in performance mode and does not impact system performance.
NOTE: Supported on Intel® E7-4800/8800 based systems only.
Online Memory Sparing – Tracks excessive number of correctable errors and copies the contents of an unhealthy rank to an available spare rank in advance of multi-bit or persistent single-bit failures that may result in future uncorrectable faults. Since a DIMM or a rank is needed to perform sparing, this technique reduces the total amount of available memory by the amount of memory used for sparing.
Memory Mirroring – System maintains two copies of all data. If an uncorrectable memory error occurs, the system automatically retrieves the good data from the mirrored (redundant) copy. Memory Mirroring consumes 50% of the system memory capacity.
NOTE: Memory mirroring will be supported in a system firmware update post initial launch.

Redundant Interconnects and Failover – The DL580 Gen8 system and Intel® Xeon® E7-4800/8800 v2 processors combine to provide a high degree of fault tolerance and failover capabilities for key processor-processor or memory-processor links or clocks.
Hot-plug redundant power supplies and hot-plug fans – The DL580 Gen8 server features N+N redundant power supplies and N+1 rotor (each fan module contains two rotors) redundancy to keep your system running in the unlikely case a power supply or rotor malfunctions.

Each fan contains two independent rotors. If one rotor fails, system continues operation in a degraded condition with remaining rotors. If two rotors fail, system initiates an OS shutdown. Two rotor failures is a highly unlikely event.

If a fan module (i.e. two rotors) is removed as a hot-plug event, the replacement fan module must be installed within approximately 60 seconds before the system initiates an OS shutdown.

FlexibleLOM :

HP ProLiant Gen8 servers offer a new flexible network technology – FlexibleLOMs, which offers customers a choice of 1Gb, 10Gb, or 10Gb base-T Ethernet or converged networking in their embedded adapter.
HP Ethernet 1Gb 4-port 331FLR FIO Adapter
HP Ethernet 1Gb 4-port 366FLR FIO Adapter
HP Ethernet 10Gb 2-port 533FLR-T FIO Adapter
HP FlexFabric 10Gb 2-port 534FLR-SFP+ FIO Adapter
NOTE: This adapter does not support FCOE Boot from SAN functionality on VMWare and FCOE with RHEL 5.9.
HP Ethernet 10Gb 2-port 560FLR-SFP+ FIO Adapter
HP Ethernet 10Gb 2-port 561FLR-T FIO Adptr
NOTE: For additional details see the Networking Section of this document.
NOTE: Wake-on-Lan feature is not supported on the DL580 Gen8 with FlexLOMs

Storage Controller :

HP Smart Array P830i/2G FBWC Controller
The Flash Backed Write Cache (FBWC) increases cache data retention capabilities from two days of existing battery backed write cache (BBWC) to infinite data retention.
Delivers 12 Gb/s line rate performance

Standard on all Models

Supports HP Secure Encryption as an option

Transportable data protection

Increases overall controller performance

NOTE: Please refer to the HP Smart Array P830 Controller QuickSpecs for more information.

Internal Storage Devices :

Hard Disk Drive
Backplane
Internal SAS lower and upper backplanes support up to ten SFF hard disk drives or solid state drives
NOTE: For CTO models, five (5) lower drive bays ship standard and five (5) upper drive bays can be ordered separately with a drive backplane kit. For BTO models, please refer to the pre-configured models section below.
Diskette Drive

None
Optional Optical Drive
None
Hard Drives
None ship standard

Maximum Internal Storage :

Hot Plug SFF SAS
۱۲ TB
۱۰ x 1.2 TB
Hot Plug SFF SAS SSD
۱۶ TB

۱۰ x 1.6 TB
Hot Plug SFF SATA SSD
۸ TB
۱۰ x 800 GB

Interfaces :

Serial
۱
Video
۱ front; 1 rear
Network RJ-45
۴
iLO 4 Remote Management
۱
micro-SD Slot
۱
USB 2.0 Ports
۸ total: 2 front; 4 rear; 2 internal

Industry Standard Compliance :

ACPI 2.0. Compliant
PCIE 2.0 Compliant
PXE Support
WOL Support
NOTE: Not supported with FlexLOMs on DL580 Gen8
Physical Address Extension (PAE) Support
Microsoft® Logo certifications
USB 2.0 Support

Common Slot Power Supply :

HP 1500W Common Slot Platinum Plus Hot Plug Power Supply
HP 1200W Common Slot Platinum Plus Hot Plug Power Supply
NOTE: 1500W power supply supports high line voltage only
NOTE: A minimum of two (2) power supplies are required. Four (4) 1500W power supplies offers N+N redundancy for highly loaded configurations.

Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor.
HP’s Common Slot (CS) power supplies allow for commonality of power supplies across a wide range of ProLiant and Integrity servers, as well as HP Storage solutions, and are designed to provide the highest power supply efficiency without degrading system performance. HP CS power supplies are tested by the Electric Power Research Institute (EPRI) and certified through the ECOS 80 Plus power supply program. HP CS power supply options provide efficiency ratings of up to 94% (80 Plus Platinum) and are available in three power output options – 460W, 750W, and 1200W – allowing the customer to “right-size” a power supply for their specific server configuration. All HP Common Slot power sources are UL, CE Mark Compliant, hot-plug and support redundant configurations.

HP CS Platinum Plus power supplies are required when enabling HP’s Intelligent Power Discovery (IPD) solution. IPD is the first technology to create an automated, energy-aware network between IT systems and facilities. This allows your company to reclaim millions of dollars in wasted power capacity and downtime costs across data centers. For more information on HP’s IPD solution, go to www.hp.com/go/ipd.

NOTE: Mixing of power supplies in the same server is not supported. All power supplies must be of the same output and efficiency rating. If non-matched power supplies are inserted you will get errors and operation will fail.

System Fans :

۴ Hot Plug Fans (eight rotors with N+1 redundancy)

Operating Systems and Virtualization Software Support for ProLiant Servers :

Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
NOTE: For more information on HP’s Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport and our driver download page http://www.hp.com/support/DL580Gen8

Graphics :

Integrated Matrox G200 video standard
۱۲۸۰ x 1024 (32 bpp)
۱۹۲۰ x 1200 (16 bpp)
HP iLO 4 On System Management Memory
۱۶ MB Flash
۲۵۶ MB DDR 3 with ECC (112 MB after ECC and video)

Form Factor :

۴U Rack form factor

HP Server UEFI ROM :

Legacy Mode or Unified Extensible Firmware Interface (UEFI) Mode
HP’s ProLiant System BIOS is an EDK2 UEFI solution, and adheres to the latest revisions of UEFI Class 2 specifications which supports both legacy boot and UEFI boot operation. The HP ProLiant DL580 Gen8 defaults to legacy boot operation and can be factory or field configured for UEFI boot operation.

NOTE: For UEFI boot operation, boot environment and OS image installations should be configured properly to support UEFI.
NOTE: For more information on HP’s ProLiant System BIOS and UEFI, see the UEFI Information Library: http://www.hp.com/go/uefi/docs.
NOTE: HP UEFI FIO Setting (758959-B21) can be selected to configure the system in UEFI mode in the factory.
To modify the server configuration ROM default settings, press F9 in the HP ProLiant POST screen to enter the UEFI System Utilities screen. By default, the System Utilities menus are in the English language.

UEFI enables numerous new capabilities, including both industry standard functionality and features specific to HP ProLiant servers. Following are some of the features that UEFI enables and that the HP ProLiant DL580 Gen8 can support when configured for UEFI boot operation:
Secure Boot – A new feature in which the system firmware, option card firmware, operating systems, and software collaborate to greatly enhance platform security.

Operating system specific functionality – Microsoft Windows 2012 supports several features only when installed in UEFI mode.

Support for > 2.2 TB (using GPT) boot drives – Such drives could previously only be used for boot drives when using RAID solutions such as HP Smart Array.

UEFI Shell – Provides a pre-boot environment for running scripts and tools. The HP ProLiant UEFI Shell provides both standard capabilities as well as numerous enhancements.

PXE boot support for IPv6 networks.

PXE Multicast Boot allowing for faster PXE deployments for large numbers of servers.

Boot support for option cards that only support a UEFI option ROM.

NOTE:
When the server is configured for UEFI Boot Mode, PXE servers must be configured with a UEFI boot image.

When the server boots in UEFI mode, it does not boot media with a legacy OS installation. This includes DOS targets and Windows or Linux systems installed in Legacy mode. The reverse is also true for servers that boot in Legacy mode.

If Microsoft Windows 2008 or Windows 2008 R2 is used in UEFI Boot Mode, UEFI Optimized Mode must be disabled (this option is enabled by default). This is required to work around an issue in Windows 2008 / 2008 R2 that requires legacy BIOS components necessary for video operations in Windows.

On System Management :

HP iLO Management
HP iLO Management is a comprehensive set of embedded management
features supporting the complete lifecycle of the server, from initial
deployment, through ongoing management, to service alerting and remote support. HP iLO Management Engine comes standard on all HP ProLiant Gen8 servers. The HP iLO Management portfolio includes:
HP iLO: The HP iLO (Integrated Lights-Out) management processor is
the core foundation for the HP iLO Management Engine
HP Agentless Management: Provides built in server health monitoring
and alerting capability without OS agents, that starts working the moment a power cord and an Ethernet cable are connected.
HP Active Health System: Always on, continuous monitoring for
increased stability and shorter downtimes; 100% configuration history;
Health and service alerts and easy export and upload to Service and
Support.
HP Intelligent Provisioning: Lets customers provision and configure a
single server without any separate media.
To start Intelligent Provisioning:
Press the F10 key during the ProLiant Gen8 server boot
Process. Please go to the Intelligent Provisioning website at
www.hp.com/go/intelligentprovisioning for additional
information and to view usage videos. Use the Service Pack for ProLiant (SPP) at www.hp.com/go/spp to get firmware and software updates.
HP iLO Mobile App: Enables the ability to access, deploy, and manage
your server anytime from anywhere from select smartphones and
mobile devices. For additional information please visit:
www.hp.com/go/ilo/mobileapp
NOTE: For more information, visit: http://www.hp.com/go/ilo or HP iLO Management Engine technologies whitepaper

Security :

Power-on password
Keyboard password
External USB port enable/disable
Network Server Mode
Serial interface control
Administrator’s password
Trusted Platform Module (TPM)
Intel® Secure Key
HP Secure Encryption (Smart Array Controller)
HP Advanced Data Guard (Smart Array Controller)

Guaranty :

یکسال گارانتی تعویض سخت افزار و سه سال پشتیبانی رایگان نرم افزار

Warranty :

ده سال خدمات پس از فروش

پشتیبانی محصول :

به زودی این بخش فعال خواهد شد.