HP Proliant Server ML310e G8 V2

اچ پی پرولینت سرور ام ال ۳۱۰ ای جی ۸

شروع قیمت: ۲۲,۵۰۰,۰۰۰ ریال

قیمت فروش ویژه: ۲۰,۵۰۰,۰۰۰ ریال

سرور ML310e G8 V2 یکی از پر فروش ترین سرور های جهان مناسب جهت شرکت های در حال توسعه می باشد. از کابردهای این سرور می توان به عنوان فایل سرور و حتی دیتا بیس سرور اشاره کرد. این سرور بسیار مقرون به صرفه و ارزان می باشد. این دستگاه قابلیت پشتیبانی از ۳۲ گیگابایت حافظه برای امور محاسباتی می باشد.

تکنولوژی های مورد استفاده و سازگار

وضعیت موجودی :
گارانتی :گارانتی ۱ ساله شرکت ماندگار (تعویض) | همراه با نصب سیستم عامل رایگان
مشخصات فنی :
Processor family :

E3-1200 v3 series Processors

Entry Processors
NOTE: All support up to 1333MT/s DDR3 memory speeds.
Intel® Pentium® G3220 (3.0GHz/2-core/3MB/54W)
Intel® Pentium® G3240 (3.1GHz/2-core/3MB/54W)
Base Processors
NOTE: All support up to 1600MT/s DDR3 memory speeds.
Intel® CoreTM i3-4130 (3.4GHz/2-core/3MB/54W, HT)
Intel® CoreTM i3-4130T (2.9GHz/2-core/3MB/35W, HT)
Intel® Pentium® G3240 (3.1GHz/2-core/3MB/54W)
Intel® Pentium® G3240 (3.1GHz/2-core/3MB/54W)
Performance Processors
NOTE: All support up to 1600MT/s DDR3 memory speeds.
Intel® Xeon® E3-1230Lv3 (1.8GHz/4-core/8MB/25W, HT)
Intel® Xeon® E3-1220v3 (3.1GHz/4-core/8MB/80W)
Intel® Xeon® E3-1230v3 (3.3GHz/4-core/8MB/80W, HT)
Intel® Xeon® E3-1240v3 (3.4GHz/4-core/8MB/80W, HT)
Intel® Xeon® E3-1270v3 (3.5GHz/4-core/8MB/80W, HT)
Intel® Xeon® E3-1231v3 (3.4GHz/4-core/8MB/80W, HT)
Intel® Xeon® E3-1241v3 (3.5GHz/4-core/8MB/80W, HT)
Intel® Xeon® E3-1271v3 (3.6GHz/4-core/8MB/80W, HT)

Cache Memory :

۸MB (1 x 8MB) L3 Cache
NOTE: For Quad-core Xeon processors.
۳MB (1 x 3MB) L3 Cache
NOTE: For Dual-core Pentium® CoreTM i3 processors.

Chipset :

Intel® C222 Chipset
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/.

Upgradeability :

Upgradeable to 4 cores
NOTE: Total 2 or 4 cores
Up to 4 DIMM slots available for higher memory capacity
Up to 8 SFF Hard Drive Bays; Or 4 LFF Hard Drive Bays
۱ x8 and 1 x16 PCIe 3.0 and 1 x8 and 1×4 PCIe 2.0 I/O slots for additional communications and storage expansion
Redundant Power Supply
Optical Drive Bay (up to 2)

On System Management Chipset :

HP iLO (Firmware: HP iLO4)
NOTE: For more information, visit: http://www.hp.com/go/ilo

Memory Protection :

Advanced ECC

Memory :

Type
HP SmartMemory
DDR3 Unbuffered (UDIMM)
DIMM Slots Available
۴
Maximum Capacity (UDIMM)
۳۲ GB (4 x 8 GB UDIMM)
NOTE: HP memory from previous generation servers are not fully compatible with the HP ProLiant ML310e Gen8 v2 Server.
NOTE: epending on the memory configuration and processor model, the memory speed may run at 1600MT/s or 1333MT/s. Please see Memory Population Table or the Online Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.

Network Controller :

HP Ethernet 1Gb 2-port 332i Adapter

HP Server ROM :

HP ROM (Read Only Memory) is now digitally signed using HP’s Corporate Signing Service. This signature is verified before the flash process starts, reducing accidental programming and preventing malicious efforts to corrupt system ROM.

HP ROM provides for essential initialization and validation of hardware components before control is passed to the customer-installed operating system. The ROM also provides the capability of booting from various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.

HP ROM performs very early configuration of the video controller, to allow monitoring of initialization progress via an attached monitor. If configuration or hardware errors are discovered during this early phase of hardware initialization, suitable messages are now displayed on the connected monitor. Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in diagnosis.

HP’s ProLiant ROM is used to configure the following:

Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP’s RBSU (ROM based setup utility) user guide: www.hp.com/support/rbsu.

Storage Controller :

HP Dynamic Smart Array B120i Controller
NOTE: Supports up to 6.0Gb/s SATA. (SATA port 0/1 support 6Gb/s and SATA port 2/3 support 3Gb/s)
NOTE: Supports RAID 0/1/10 only. No FBWC support. For FBWC, a standup Smart Array Controller card must be configured.
NOTE: For set up instructions, please refer to the HP ProLiant ML300 series server user guide.
NOTE: For general information about HP Smart Array B120i SATA RAID Controller, please go to: http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/smartarrayb120i/
index.html

Internal Storage Devices :

Optical Drives
One of the following depending on model
HP Half-Height SATA DVD-ROM Optical Drive
HP Half-Height SATA DVD-RW Optical Drive
Hard Drives
۱x500GB HP LFF SATA HDD included in Performance Model
Hard Drive Bays
One of the following depending on model
۴ LFF drive bays (non-hot-plug and hot-plug)
۸ SFF hot-plug drive bays
NOTE: HP ProLiant ML310e Series servers offer both SFF, and LFF versions in CTO.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard drive blanks, they can order more using either P/N 666987-B21: HP SFF Gen8 Hard Drive Blank Kit or P/N 666986-B21: HP LFF Gen8 Hard Drive Blank Kit.

Maximum Internal Storage :

Hot Plug LFF SAS
۱۶TB
۴ x 4TB
Hot Plug SFF SAS
۹٫۶TB
۸x 1.2TB
Non Hot Plug LFF SAS
۲٫۴TB
۴ x 600GB
Hot Plug LFF SATA
۱۶TB
۴ x 4TB
Hot Plug SFF SATA
۸TB
۸ x 1TB
Non Hot Plug LFF SATA
۱۲TB
۴ x 3TB
Hot Plug SFF SAS SSD
۳٫۲TB

۸ x 400GB
Hot Plug SFF SATA SSD
۶٫۴TB
۸ x 800GB
Hot Plug LFF SATA SSD
۳٫۲TB
۴ x 800GB

Interfaces :

Serial
۱ (rear)
Video
۱ (rear)
Network RJ-45 (Ethernet)
۲ (۱ shared for HP Integrated Lights-Out)
HP iLO Remote Management Network Port
۱ Gb Dedicated
Micro SD slot
۱ (internal)
NOTE: The Micro SD slot is not a hot-pluggable device. Customers should not attempt to plug a Micro SD card into the Micro SD slot while the server is powered.
USB
۸ (۴ front, 2 rear(USB3.0), 1 internal standard USB and 1 internal USB header)
NOTE: RHEL 5.9 OS would not be supporting USB3.0

Industry Standard Compliance :

ACPI 2.0b Compliant
PCIe 3.0 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
USB 2.0 /3.0 Support

Common Slot Power Supply :

The ML310e Gen8 v2 supports two power supplies, a 350W Multi-Output Power Supply and a 460W Common Slot Gold Power Supply. The 350W Multi-Output Power Supply is a non-redundant power supply with an efficiency rating of 85%.

HP’s Common Slot (CS) power supplies allow for commonality of power supplies across a wide range of ProLiant and Integrity servers, as well as HP Storage solutions, and are designed to provide the highest power supply efficiency without degrading system performance. HP CS power supplies are tested by the Electric Power Research Institute (EPRI) and certified through the ECOS 80 Plus power supply program. The 460W HP CS power supply option provides an efficiency rating of up to 92%. All HP Common Slot power sources are UL, CE Mark Compliant, hot-plug and support redundant configurations.

NOTE: Mixing of power supplies in the same server is not supported. All power supplies must be of the same output and efficiency rating. If non-matched power supplies are inserted you will get errors and operation will fail.

It is highly recommended that you use the HP Power Advisor in defining the “Right-Size” power supply for your needs. HP Power Advisor can be accessed at: www.hp.com/go/hppoweradvisor.

NOTE: The 80 PLUS program is a unique forum that unites electric utilities, the computer industry, and consumers in an effort to bring energy efficient technology solutions to the marketplace. 80 Plus independently tests power supply efficiency and publicly posts the results on 80Plus.org.

Redundant Power: Optional (1 + 1 redundant) power supplies can be purchased through power supply option kits (see Power Supplies for part numbers).

NOTE: Power Specification and Technical Content for supported power supplies can be found at: http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html

System Fans :

One (1) Non-redundant system fan ships standard

One (1) Non-redundant PCIe fan ships standard

Operating Systems and Virtualization Software Support for ProLiant Servers :

Microsoft Windows Server

Canonical Ubuntu
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
NOTE: For more information on HP’s Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport and our driver download page: http://www.hp.com/support/ML310eGen8v2.

Graphics :

Integrated Matrox G200 video standard

۱۲۸۰ x 1024 (32 bpp)
۱۹۲۰ x 1200 (16 bpp)

HP iLO 4 On System Management Memory
۱۶ MB Flash
۲۵۶ MB DDR 3 with ECC (112 MB after ECC and video)

Form Factor :

Micro ATX Tower (4U) chassis with feet/bezel:
۱۴٫۵″ (۳۶٫۸۲cm) Height x 6.89″ (17.5cm) Width x 18.71″ (47.52cm) Length

۸ SFF Drive Bay Cage:
۴٫۶″ (۱۱٫۷۲cm) Height x 5.74″ (14.57cm) Width x 4.79″ (12.16cm) Length
۴ LFF Drive Bay Cage:
۴٫۶″ (۱۱٫۷۲cm) Height x 5.74″ (14.57cm) Width x 6.90″ (17.54cm) Length

On System Management :

HP iLO Management Engine
HP iLO Management Engine is a comprehensive set of embedded management features supporting the complete lifecycle of the server, from initial deployment, through ongoing management, to service alerting and remote support. HP iLO Management Engine comes standard on all HP ProLiant Gen8 servers. The HP iLO Management Engine portfolio includes:
HP iLO: The HP iLO (Integrated Lights-Out) management processor is the core foundation for the HP iLO Management Engine
HP Agentless Management: Provides built in server health monitoring and alerting capability without OS agents, that starts working the moment a power cord and an Ethernet cable are connected.
HP Active Health System: Always on, continuous monitoring for increased stability and shorter downtimes; 100% configuration history; Health and service alerts and easy export and upload to Service and Support.
HP Intelligent Provisioning: Lets customers provision and configure a single server without any separate media. No more SmartStart CDs or Smart Update Firmware DVD are needed.
To start Intelligent Provisioning:
Press the F10 key during the ProLiant Gen8 server boot process (also known as power on self test or POST).
Please go to the Intelligent Provisioning website at www.hp.com/go/intelligentprovisioning for additional information and to view usage videos.
Use the Service Pack for ProLiant (SPP) at www.hp.com/go/spp to get firmware and software updates.
HP iLO Mobile App: Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit: www.hp.com/go/ilo/mobileapp
NOTE: For more information, visit: http://www.hp.com/go/ilo or HP iLO Management Engine technologies whitepaper

HP Insight management :

HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM) provide a comprehensive approach to firmware and system software maintenance. Together they provide better operating stability and ensure maximum uptime. The SPP will be updated at a predictable cadence, typically coinciding with new HP server hardware launches. By enabling firmware to be updated online and integrating firmware and system software updates in one operation, HP SUM and the SPP offer faster updates of individual. Further improving system uptime and stability is the fact that HP provides 12 months of support for each Service Pack for ProLiant release.

The user experience around HP SUM and the SPP has been improved in several ways, starting with the web download. A single web page provides access to a single download containing both the latest version of HP SUM and the latest SPP. Optional smaller subsets with only specific types of servers or specific operating systems are offered to save on download time. The HP SUM application provides a straightforward, intuitive user interface that guides the user through the steps of discovery, analyses and update, providing comprehensive information on available updates, criticality and interdependencies. This information is also available in reports. By providing the option of multiple local or shared repositories which can be easily updated from hp.com, HP SUM provides the tools to optimize stability and consistency throughout the company. While HP SUM and the SPP recommend the combinations of firmware and system software that HP has found to be the best practice, the application gives customers the flexibility to set their own specific baseline.

The Service Pack for ProLiant has been rigorously tested with specific attention for interaction between firmware, drivers and agents both within the server This testing ensures the highest quality as well as providing the input for HP SUM to deploy updates taking into account all interdependencies, when determining the correct updates and order of update deployment.

NOTE: The Service Pack for ProLiant (which includes HP SUM) can be downloaded from www.hp.com/go/spp/download. More information can be found: http://www.hp.com/go/SmartUpdate, www.hp.com/go/spp and http://www.hp.com/go/hpsum

Security :

Power-on password
Administrator’s password

Guaranty :

یکسال گارانتی تعویض سخت افزار و سه سال پشتیبانی رایگان نرم افزار

Warranty :

ده سال خدمات پس از فروش

پشتیبانی محصول :

به زودی این بخش فعال خواهد شد.