HP Proliant Server DL20 G10

اچ پی پرولینت سرور دی ال 20 جی 10

شروع قیمت: 168,300,000 ریال

قیمت فروش ویژه: 162,000,000 ریال

سرور جمع و جور HPE ProLiant DL20 Gen10 طراحی شده برای پردازنده اینتل Xeon® E ، پردازنده های پنتیوم و Core i3 یک ترکیب منحصر به فرد از قابلیت های کلاس سازمانی و قیمت فراهم می کند. این انعطاف پذیری، پیکربندی فوق العاده را ارائه می دهد تا برای  طیف وسیعی از نیازهای تجاری در یک قیمت مقرون به صرفه عرضه شود. این پلت فرم متراکم را برای وظایف سنگین متنوع در محیط های با فضای محدود می توانید قرار دهید و از طریق اتوماسیون سریعترین وظایف ضروری مدیریت چرخه حیات سرور را با HPE iLO 5  با سهولت حفظ کنید.

تکنولوژی های مورد استفاده و سازگار

وضعیت موجودی :
گارانتی :گارانتی 1 ساله شرکت ماندگار (تعویض) | همراه با نصب سیستم عامل رایگان
Processor family :

Intel Xeon-E Series
HPE DL20 Gen10 Intel Xeon E-2124 (3.3GHz/4-core/71W) FIO Processor Kit
HPE DL20 Gen10 Intel Xeon E-2134 (3.5GHz/4-core/71W) FIO Processor Kit
HPE DL20 Gen10 Intel Xeon E-2144G (3.6GHz/4-core/71W) FIO Processor Kit
HPE DL20 Gen10 Intel Xeon E-2174G (3.8GHz/4-core/71W) FIO Processor Kit
HPE DL20 Gen10 Intel Xeon E-2126G (3.3GHz/6-core/80W) FIO Processor Kit
HPE DL20 Gen10 Intel Xeon E-2136 (3.3GHz/6-core/80W) FIO Processor Kit
HPE DL20 Gen10 Intel Xeon E-2186G (3.8GHz/6-core/95W) FIO Processor Kit

Intel® Core® i3 series Processors
HPE DL20 Gen10 Intel Core i3-8300 (3.7GHz/4-core/62W) FIO Processor Kit

Intel® Pentium® G5000 series Processors
HPE DL20 Gen10 Intel Pentium G5400 (3.7GHz/2-core/54W) FIO Processor Kit

Cache Memory :

12MB (1x12MB) Level 3
NOTE: For Six-core processors.
8MB (1x8MB) Level 3
NOTE: For Quad-core processors.
4MB (1x4MB) Level 3
NOTE: For Dual-core processors.

Chipset :

Intel® C242 Chipset

Upgradeability :

One of the following depending on model

FlexibleLOM connector for 1 or 10 or 25 Gigabit networking options

Up to 4 DIMM slots available for higher memory capacity

Up to 4SFF (+2SFF optional) Drive bays or 2LFF Drive bays

HPE Smart Array or Smart HBA Controller

Redundant Power Supply

Dedicated iLO Management Port

M.2 NVMe SSDs for boot

On System Management Chipset :

HPE iLO 5 ASIC

Memory Protection :

Memory Protection
One of the following depending on model
Advanced ECC
Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip.

Memory :

Type:
HPE DDR4 Unbuffered (UDIMM)
DIMM Slots Available 4
4 DIMM slots per processor, 2 channels per processor, 2 DIMMs per channel
Maximum capacity (UDIMM)
64 GB (4 x 16 GB UDIMM @ 2666 MT/s)

Network Controller :

HPE Ethernet 1Gb 2-port 332i network Adapter or BCM5720.

The HPE ProLiant DL20 Gen10 server offers the customer a dual-port NIC standard with the option to upgrade with a variety of networking options.

Optional Raid Controller :

Essential RAID Controllers

HPE Smart Array E208i-a SR G10 LH Controller

HPE Smart Array E208e-p SR Gen10 Controller

Performance RAID Controllers

HPE Smart Array P408i-a SR G10 LH Controller

HPE Smart Array P408e-p SR Gen10 Controller

Storage Controller :

Software RAID

HPE Smart Array S100i SR Gen10 SW RAID

NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional controller will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.

NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled by selecting 784308-B21.

NOTE: The S100i is a 14-port SATA controller, but only 12 ports are accessible as 2 are leveraged to support the 2 M.2 options on the Primary Riser.

NOTE: The S100i supports windows only.

NOTE: For Linux users, HPE offers a solution that uses in-distro open-source software to create a two-disk RAID

Internal Storage Devices :

Optical Drive : Available on 4 SFF and 2 LFF CTO Servers as an option (DVD-ROM or DVD-RW)

Hard Drives : None ship standard

Maximum Internal Storage :

STORAGE CAPACITY CONFIGURATION

Hot Plug SFF SAS HDD 14.4 TB (4 + 2 x 2.4 TB  (with optional +2 drive option))

Hot Plug SFF SATA HDD 12 TB (4+2 x 2.0 TB (with optional + 2 drive option))

Hot Plug SFF SAS SSD 91.8 TB (4+2 x 15.3 TB (with optional + 2 drive option))

Hot Plug SFF SATA SSD 23.04 TB (4+2 x 3.84 TB (with optional + 2 drive option))

Hot Plug LFF SAS HDD 24 TB (2 x 12 TB)

Hot Plug LFF SATA HDD 24 TB (2 x 12 TB)

Hot Plug LFF SAS SSD 1.6 TB (2 x 800 GB)

Hot Plug LFF SATA SSD 3.84 TB (2 x 1.92 TB)

Interfaces :

Serial 1 port – Optional

Video 1 Rear – VGA port (standard on all chassis types)

Network Ports 2x 1GbE embedded NIC (standard on all chassis types)

iLO Remote Mgmt Port 1 Gb Dedicated – Optional

USB 3.0 5 USB ports (standard)
Front: 1xUSB 3.0, 1xUSB iLO Service Port

Rear: 2xUSB 3.0
Internal: 1x USB 3.0

Industry Standard Compliance :

ACPI 6.1 Compliant
PCIe 3.0 Compliant
WOL Support
Microsoft® Logo certifications
PXE Support
USB 3.0 Compliant
USB 2.0 Compliant
SMBIOS 3.1
UEFI 2.6 (Unified Extensible Firmware Interface Forum)
Redfish API
IPMI 2.0
Secure Digital 4.0
TPM 1.2 and 2.0 support
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
SNMP v3
TLS 1.2
DMTF Systems Management Architecture for Server Hardware Command Line (SMASH CLP)
Active Directory v1.0
ASHRAE A3/A4
Energy Star

Common Slot Power Supply :

HPE 290W FIO Power Supply

NOTE: Available in 92% efficiency.

HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

NOTE: Available in 94% efficiency.

HPE 800W Flex Slot -48VDC Platinum Hot Plug Low Halogen Power Supply Kit

NOTE: Flex Slot -48VDC power supplies support power efficiency of up to 94%.

HPE Entry-Level Power Supplies provide lower-cost options for customers trying to balance their need for enterprise class efficiency and reliability while maintaining lowest possible hardware costs.  The above mentioned Entry-Level power supply options have been designed specifically for HPE ProLiant DL20 Gen10 Server.

The HPE 290W FIO Power Supply is the standard, non-redundant AC power supply with 80Plus Silver Certification.  It features 92% power efficiency with a set of features optimized for the DL20 Gen10 rack server.

HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to “right-size” a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid “trapped” power capacity in the data center.

System Fans :

One of the following depending on model

Includes 3 standard single rotor non-hot plug and non-redundant fans

NOTE: This applies for all three chassis: 2LFF NHP, 2LFF HP and 4SFF HP

Operating Systems and Virtualization Software Support for ProLiant Servers :

Windows Server 2016 (Most Recent Version)

VMware vSphere 6.7 and 6.5 U2

NOTE: VMware support is available on Intel Xeon E-Series processors only.

Red Hat Enterprise Linux (RHEL) 7.5

SUSE Linux Enterprise Server (SLES) 15  and 12 SP3

ClearOS/VM 7.5

NOTE: ClearOS allows you to build a fully functional server that is just right for you at no upfront cost. For more information on ClearOS, please visit http://www.hpe.com/servers/clearos.

CentOS 7.5

NOTE: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server.

http://www.hpe.com/info/ossupport

Graphics :

Integrated Matrox G200 video standard

Video modes up to 1920 x 1200 @ 60 Hz (32 bpp)
16 MB Video Memory

HPE iLO 5 on system management memory

32 MB Flash
4 Gbit DDR3 with ECC protection

Form Factor :

1U Rack form factor

Embedded Management :

HPE Integrated Lights-Out (HPE iLO)

Monitor your servers for ongoing management, service alerting, reporting and remote management with HPE iLO.

Learn more at http://www.hpe.com/info/ilo.

UEFI

Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI).

Learn more at http://www.hpe.com/servers/uefi.

Intelligent Provisioning

Hassle free server and OS provisioning for one or more servers with Intelligent Provisioning.

Learn more at

http://www.hpe.com/servers/intelligentprovisioning.

iLO RESTful API

iLO RESTful API is Redfish API conformance and offers simplified server management automation such as configuration and maintenance tasks based on modern industry standards. Learn more at http://www.hpe.com/info/restfulapi.

Server Utilities

Active Health System

The HPE Active Health System (AHS) is an essential component of the iLO management portfolio that provides continuous, proactive health monitoring of HPE servers. Learn more at http://www.hpe.com/servers/ahs.

Active Health System Viewer

Use the Active Health System Viewer, a web-based portal, to easily read AHS logs and speed problem resolution with HPE self-repair recommendations, to learn more visit: http://www.hpe.com/servers/ahsv.

Smart Update

Keep your servers up to date with the HPE Smart Update solution by using Smart Update Manager (SUM) to optimize the firmware and driver updates of the Service Pack for ProLiant (SPP). Learn more at http://www.hpe.com/info/smartupdate.

iLO Amplifier Pack

Designed for large enterprise and service provider environments with hundreds of HPE servers, the iLO Amplifier Pack is a free, downloadable open virtual application (OVA) that delivers the power to discover, inventory and update Gen8, Gen9 and Gen10 HPE servers at unmatched speed and scale. Use with an iLO Advanced License to unlock full capabilities.

Learn more at http://www.hpe.com/servers/iLOamplifierpack.

HPE iLO Mobile Application

Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit: http://www.hpe.com/info/ilo/mobileapp.

RESTful Interface Tool

RESTful Interface tool (iLOREST) is a single scripting tool to provision using iLO RESTful API to discover and deploy servers at scale. Learn more at http://www.hpe.com/info/resttool.

Scripting Tools

Provision one to many servers using your own scripts to discover and deploy with Scripting Tool (STK) for Windows and Linux or Scripting Tools for Windows PowerShell.

Learn more at http://www.hpe.com/servers/stk orhttp://www.hpe.com/servers/powershell.

HPE OneView Standard

HPE OneView Standard can be used for inventory, health monitoring, alerting, and reporting without additional fees. It can monitor multiple HPE server generations. The user interface is similar to the HPE OneView Advanced version, but the software-defined functionality is not available. Learn more at http://www.hpe.com/info/oneview.

NOTE: HPE OneView on DL20 Gen10 will be available in 1H 2019.

HPE Systems Insight Manager (HPE SIM)

Ideal for environments already using HPE SIM, it allows you to monitor the health of your HPE ProLiant Servers and HPE Integrity Servers. Also provides you with basic support for non-HPE servers. HPE SIM also integrates with Smart Update Manager to provide quick and seamless firmware updates. Learn more at http://www.hpe.com/info/hpesim.

HP Server utilities :

HP Smart Update
Optimize firmware and driver updates with HP Smart Update solutions. Learn more at http://www.hp.com/go/smartupdate.

HP Systems Insight Manager (HP SIM)
HP SIM allows you to monitor the health of your HP ProLiant Servers and HP Integrity Servers, and also provides you with basic support for non-HP servers.
HP SIM also integrates with HP SUM to provide quick and seemless firmware updates. Learn more at http://www.hp.com/go/sim.

HP OneView Standard
HP OneView Standard can inventory, monitor, alert, and report on your G6, G7, Gen8, and Gen9 servers, while using the HP OneView user interface. Annual support is optionally available. Learn more at http://www.hp.com/go/oneview.

Scripting Tool Kit and Windows PowerShell
Provision 1 to many servers using your own scripts to discover and deploy them with HP Scripting Tool Kit for Windows and Linux or HP Scripting Tools for Windows PowerShell. Learn more at http://www.hp.com/go/ProLiantSTK or http://www.hp.com/go/powershell.

HP RESTful Interface Tool
HP RESTful Interface tool is a scripting tool to provision servers using RESTful API Interface to discover and deploy servers at scale. Learn more at http://www.hp.com/go/restfulapi.

HP iLO Mobile Application
Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit: http://www.hp.com/go/ilo/mobileapp.

HP Insight Online
HP Insight Online, available at no additional cost as part of your HP warranty, Care Pack or contractual support agreement with HP, is a personalized dashboard for simplified tracking of IT operations and support information from anywhere, anytime. Learn more at http://www.hp.com/go/insightonline/info.

Security :

UEFI Secure Boot and Secure Start support
Immutable Silicon Root of Trust
FIPS 140-2 validation
Common Criteria certification
Configurable for PCI DSS compliance
Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser
Support for Commercial National Security Algorithms (CNSA)
iLO Security Modes including a New iLO Advanced Premium Security License
Granular control over iLO interfaces
Smart card (PIV/CAC) and Kerberos based 2-factor Authentication
Tamper-free updates – components digitally signed and verified
Secure Recovery – recover critical firmware to known good state on detection of compromised FW
Ability to rollback firmware
Secure erase of NAND
TPM (Trusted Platform Module) 1.2 option
TPM (Trusted Platform Module) 2.0 option
Bezel Locking Kit
Chassis Intrusion detection option
Intel® Software Guard Extensions (Intel® SGX)

Guaranty :

یکسال گارانتی تعویض سخت افزار و سه سال پشتیبانی رایگان نرم افزار

Warranty :

ده سال خدمات پس از فروش